Plate type

WXRN Series Evaporative Condenser

WXRN Series Evaporative Condenser is a kind of high-efficient heat exchange equipment which comes into being on the basis of absorbing the most advanced foreign heat-exchange technology.

Key advantages

WXRN Series Evaporative Condenser is a kind of high-efficient heat exchange equipment which comes into being on the basis of absorbing the most advanced foreign heat-exchange technology.



The device is based on water and air as the cooling medium, the refrigerant medium or other high-heat fluid are in the tube, high-heat medium goes through from the upper intake pipe to all heat exchange spirals. When it is cooled by air or water, it will flow out through lower discharge pipe. Circulating water pump leads recycled water from the bottom of the equipment to the top of the heat exchange coil stack, and then goes through shower to evenly spray the water on the surface of the heat exchange coil by nozzle. After that, the water will go through from all heat exchange coil to collecting basin for recycling use. Inlets are set up at the bottom of the equipment, leading the fresh wind go through the bottom of the coils to the entire group of heat exchange spirals from axial flow fan. This kind of structure is the heat-exchange countercurrent form of wind and water. At the top of the water pipes, there assembles high-efficient water eliminator for reducing the splash rate of the water.


Technical parameters

Convenient maintenance

Humanized design structure with large access door and sufficient inner room, maintainers can conveniently examine and repair the equipment inside.


Realize on-line maintenance

The ball cock and dust-gauze of SWL series products can be examined and repaired under on line maintenance. Because of the same direction of airflow and water flow, it is very convenient to examine and repair nozzles and coils when the machine is running.


Small Floor Space and Low Investment

SWL series products combine the features of traditional condenser, cooling tower, circulating water pump, basin and connected pipes together. They have the advantages of small floor space and low investment.


Slope Collecting basin with convenient cleanout

The bottom of the collecting basin is tilted towards pollutant discharge exit, and the PVC padding heat exchange is suspending, all of these design features can help clear the pollutants and impurities in collecting basin.


Excellent Heat Exchange Performance

SWL series products adopt the technology of the combination of coil and stuffing to avoid the dry spot and dirt formed on the coils. So the performance of heat exchange is dramatically effective.


Convenient transportation and installation

SWL series products adopt standard module transportation on-site installation, which makes transportation and installation easy.


Low fault rate

Fans and water pumps are both equipped with high-quality bearings, apart from that, there is no other wearing components. Fans use rigid type structure, there is no rotational losses brought by pulley structure, low noise, and low failure rate are its characteristics as well.


Low Operating Cost and Energy Saving

Because of its unique structure, SWL series products have the advantages of high thermal technology performance, low condensing temperature, water and energy saving, low noises and low maintenance cost.